Stitch and glue is a simple boat building method which uses plywood panels stitched together, usually with copper wire, and glued together with epoxy resin.this type of construction can eliminate much of the need for frames or ribs. plywood panels are cut to shape and stitched together to form an accurate hull shape without the need for forms or special tools.. The stitch and glue method uses wire sutures to hold panels together until they can be joined permanently with epoxy and fiberglass tape. the outside of the hull is completely coated with fiberglass or dynel cloth sheathing. all exposed wood is coated with epoxy to encapsulate the boat from sun and sea to retain the excellent characteristics of. Stitching. basically, stitch and glue boats are constructed by gluing panels of plywood together using epoxy resin and fiberglass. the stitching is used to hold the panels in place while the glue is applied and allowed to cure..
Most stitch and glue boats are sheathed on the outside with what is referred to as 6oz glass. 6oz fiberglass cloth actually weighs about 5.6oz per square yard and commonly comes in two different styles. style 7533 is the most common, it is a plain weave fiberglass fabric which means that the yarns are twisted before it is woven. 3733 is a. Stitch and glue boat building: definition: a stitch and glue boat hull is made of plywood panels assembled with fiberglass tape. contrary to traditional boat building in which molds define the hull shape, in stitch and glue, the hull panels define the shape. this is important to remember: let the plywood panels take their natural fair shape.. Stitch and glue: start sewing the panels together with small wire twists. you exert no force on the panels. they easily assume their proper shape as you stitch them together. next, glue the seams, remove the wires the following day, and fiberglass the boat. we recommend mixing epoxy, pouring it in a paint tray and laying it on with a foam roller..
